Scale RC Forum Forum Members’ Builds Off-Road builds Vanquish VS4-10 FREEDOM83

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #106967
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    Yeah !! Common !!!

    Well, bought from JSCALE on day 1, day 10 arrived from Belgium to Vitoria (Spain)

    I leave photos of the assembly, although it is the same for everyone, add that in my case I have not seen any problem or problem, very charming with this car.

    Front axle

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Rear axle

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Another detail, the internal bearing of the spool, fatter than the others

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    I love these details, corrected problems included in the KIT, not to buy separately, note RC4WD:

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Another great detail, for those who doubt how to fit the spool, two washers say the instructions and two carries, the two that includes half of the uni-joint in the bag.

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Chassis , here I have to add that I was very surprised, and the finish that is spectacular as everything, if not the weight, weighs as much as a modelex chassis, in case anyone had doubts about it when seeing plastic .
    And by the way, I recommend doing the chassis step with electric screwdriver hehehehe

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    links

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    now the marriage of everything , inner fenders painted in matt black

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Until here came the work of Tuesday, I will immediately put the work of Wednesday

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Vanquish vs4-10 pro by alberto espinosa[/url], en Flickr

    Now the work of Wednesday, bodywork :

    first , silver

    Sin título by alberto espinosa[/url], en Flickr

    second , blue

    Sin título by alberto espinosa[/url], en Flickr

    third, black, inside normal, and matt outside

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sticker pack :

    Sin título by alberto espinosa[/url], en Flickr

    While the body is drying, I get the inside, black inside and the back box in matt

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Front grille :

    Sin título by alberto espinosa[/url], en Flickr

    Color line :

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Body nbear finish , waiting for SCOUT ornaments

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    This weekend I attended a hangout, and took the opportunity to buy some deep dish to mount the 1.7 bogger.

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    These rubbers are for mud and sand, for rock I will put other

    #106992
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    The deep dish are too wide for the 1.7 boggers , so I’ll put the Rockbeast here and take other narrower rims for the bogger tires :

    Sin título by alberto espinosa[/url], en Flickr

    #107036
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    Finally, after more than 20 days waiting for the OVERDRIVE arrived, thanks to the wonderful customs of our country, I have to pay 27€ more, apart from the 52$ of the order including shipping , in this country like to steal, in sight this

    For the rest of the genius, as in each step, the quality in the KIT is noticed, nothing to do with anything else on the market the truth is told

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Now waiting for electronics …

    #107094
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    It is a pleasure to have a store next to home (TeamTracker) . Hudy horn low profile & servo Corally :

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    The reel hits the panhard if you ride it forward, if you put it back with the upper link support.I put it back because it asks for less elevation, and with some caps it is in place

    Sin título by alberto espinosa[/url], en Flickr

    #107097
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    Some videos of yesterday at home, testing angles to see if you need weights or not, at the moment I do not think, to see in the field climbing that such is behaved, moemnto, everything works ek jejjeje

    https://www.youtube.com/watch?v=zAJt-6goIfU

    https://www.youtube.com/watch?v=opOVyPE5N9w

    #107117
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    At last !!!!!

    WhatsApp Image 2020-03-06 at 14.48.39 by alberto espinosa[/url], en Flickr

    #107119
    Member
    MarkBMarkB
    • Hitting The Trail
    • ★★★

    Hi, can I ask where you got those decals from?

    1 user thanked author for this post.
    #107139
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    Hi, can I ask where you got those decals from?

    Yess mate !!!

    http://club5racing.com/

     

     

    #107140
    Member
    MarkBMarkB
    • Hitting The Trail
    • ★★★

    Hi, can I ask where you got those decals from?

    Yess mate !!! http://club5racing.com/

    Brilliant, thanks 👍🏻

    #107142
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    photos of emblems

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    #107213
    Member
    FREEDOM83FREEDOM83
    • Ready To Trail
    • ★★

    Well, because of quarantine and with teleworking, I take the opportunity to do the installation although even with the provisional esc and motor:

    Sin título by alberto espinosa[/url], en Flickr

    Sin título by alberto espinosa[/url], en Flickr

    And cable ties, which comes with the Axial kit:

    Sin título by alberto espinosa[/url], en Flickr

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.