Scale RC Forum Forum Members’ Builds Off-Road builds Samil 50 Recovery Truck

This topic contains 53 replies, has 7 voices, and was last updated by raven62 4 minutes ago.

Viewing 9 posts - 46 through 54 (of 54 total)
  • Author
    Posts
  • #105878
    Sysop
    Avatar
    Retrocosm
    • Scale Off Road Pro
    • ★★★★★★

    Gorgeous machining.

    #105896
    Member
    raven62
    raven62
    • Scaling Like A Pro
    • ★★★★★

    The main traverse is ready to use.

    You can look at my 3d plannings with fusion 360

    https://a360.co/2ZabJCM

    password: rabe62

     

    you can go round, move, look, special feature is the ability to made an explosion views of the parts. You can‘t save your modifications. So it‘s save. Try it.

     

    Last parts of the traverse are the beamflanges on the bottom.

    It was a good exercise on the roundtable

    F7C7EF12-EA76-4CB8-BEB3-69CB2527912A6E89DCC1-9ED7-4FED-859F-919F44C3D959

     

    Regards

    Ralf

    #105898
    Sysop
    Avatar
    Retrocosm
    • Scale Off Road Pro
    • ★★★★★★

    Beautiful work Ralf, an absolute joy to follow.

    #105923
    Member
    raven62
    raven62
    • Scaling Like A Pro
    • ★★★★★

    Thank you.

     

    Today I’ve  finished the puzzle for the two beams. Some polish and adjustments and then I’m able to lift a bit – or a byte 😀 . We’ll see

     

    H07147

    Regards

    Ralf

    #105928
    Moderator
    Pete Attryde
    Pete Attryde
    • Scale Off Road Pro
    • ★★★★★★

    Truely inspiring work Ralf, I really must invest in a little mill for my workshop. really looking forward to seeing this all assembled and working.

    Pete's Scale Fab Shop - Facebook  Instagram

    #105933
    Member
    raven62
    raven62
    • Scaling Like A Pro
    • ★★★★★

    Thank you, Pete.

    Lathe and mill are expensive toys but worth every single cent.

     

    the crane is now roughed up to find lacks of … whatever. But, its ok. All of it 🙂

    A short clip of the rigging and the functionality  of the crane

    https://www.instagram.com/p/B1lSaIVBpI9/?igshid=13lw31orrrv2g

     

    Regards

    Ralf

    #105963
    Member
    raven62
    raven62
    • Scaling Like A Pro
    • ★★★★★

    Big step is done. The mechanical Part is ready to use. Today I mount the crane to the chassi. I like it. Looks cool and really technical 😀

     

    04B3BC9B-A668-485A-84FD-3F42F17916E315ABEBF7-87E1-4BBC-9555-D21B299C3E53

    Only 307425 things to do….

    Regards

    Ralf

    #105972
    Sysop
    Avatar
    Retrocosm
    • Scale Off Road Pro
    • ★★★★★★

    Looks fantastic, I look forward to seeing the crane in action.

    #106084
    Member
    raven62
    raven62
    • Scaling Like A Pro
    • ★★★★★

    After a very nice Holiday in good old england the work on the crane starts again.

    A great problem on these selfmade cars is the need to put the right finish on the many little parts before powder coating, polishing or wathever.

    At the crane I have roundabout 120 tiny things to deburr and grinding.

    After a lot of googeling I’ve found my method to do this things.

    Shortly bought in the web, yesterday a small barrel finishing machine arrived.

    I’m really pleased with my first attempts with this technique.

    Just add special grinding stones, grinding powder, water and the things to be handled in a barrel.

    Put it on the machine.

    Wait.

     

    And wait.

     

     

    And wait.

     

     

     

    And wait 😀

     

    At last the really nice results are visible.

    before

    IMG_8679

    after

    H08570

    A slight “sandblast”-like surface is done. (With other ingredients in the barrle it should be polished)

    So I’m able to do the hundred little things for the crane in six hours of waiting instead of man hours of grinding etc.

    H08572

     

    P.S.:

    Rumors told me that this technique may be also able for plastics

     

     

    Regards

    Ralf

Viewing 9 posts - 46 through 54 (of 54 total)

You must be logged in to reply to this topic.