Scale RC Forum Forum Members’ Builds Off-Road builds Mitsubishi Pajero MST CMX

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #119551
    Member
    FREEDOM83
      • Trailing And Scaling
      • ★★★★

      Some time ago I had one of these chassis with the bearing kit at home and I didn’t even get to mount it. Now I have bought one from a close RTR friend and it is cheap, also with a bearing kit and sprocket kit, it also has something else that can be seen in the photos, the package arrives tomorrow hehehe:

      [ /url]
      [ /url]
      [ /url]
      [ /url]

      And on the other hand, also a close friend, I have taken the tamiya rigid body, it has a job, which is what I wanted, but it is whole and healthy, which is what matters, next to home and very cheap.

      [ /url]
      [ /url]
      [ /url]

      Now to put the two parts together, revive the body, make an interior and take measurements to see if I can put an ARB bumper on it.

      I have a plan for the future with this chassis, but everything in due time

      We continue, the jimny’s bumper is not valid, it would be a hilux by size, anyway, as what I want is to put a winch, and spend little, I think that a trx6 amg bumper could be adapted.

      For now some photos from yesterday;
      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]

      And today Christmas morning I started with the refurbishment… clean some bearings, I’ll touch foams and suspensions, I’ll change the 26t for 45t, I don’t like the cardan system that it has, just like the one with the bearings although there is no solution there . When I go back again I will start with the pajero bodysuit

      [ /url]
      [ /url]
      [ /url]

      Well, the axles are ready, bearings are well greased and stainless steel screws, I have also put brass bushings on the brackets, to be able to put standard stainless steel screws

      [ /url]

      I have made more progress, pending the 45t to mount the tranny, I already have the chassis finished with stainless steel screws, homemade links with traxxas ball joint and metal ball, incision shock absorbers with mst springs. At the moment it is like this:

      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]

      And here are some photos with the body simply resting on the heels, poor Pajero, he needs love, that’s what’s next hahaha

      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]

      body supports

      [ /url]
      [ /url]
      [ /url]
      [ /url]
      [ /url]

      And he still has a lot of sandpaper left, I don’t know what the hell that gray is but he is rough and doesn’t come out with anything, also when sanding he makes balls buffff… ..

      [ /url]
      [ /url]
      [ /url]

      #119598
      Member
      FREEDOM83
        • Trailing And Scaling
        • ★★★★

        paint is going off hahahaha

        and chasis is finished


        #119599
        Member
        FREEDOM83
          • Trailing And Scaling
          • ★★★★

          After a lot of hours of work removing paint , its ready to paint again and make interior







          #119728
          Member
          FREEDOM83
            • Trailing And Scaling
            • ★★★★

            Ready !!








            1 user thanked author for this post.
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.