Jiefang CA-30 KingKong 6×6

[Member FREEDOM83 Trailing And Scaling★★★★]

Hello, finally since 2011 when I played SPINTIRES for the first time, I will have a suitable truck hehehehe, although basically it will be for community service, with a tipper, I will make it so that it can be removed and put on quickly so that you can use the truck. Some routes currently have this material on their way home:

Kingkong 6×6 chassis

body Jiefang CA-30

Bruder tipper

And two 90mm N20 screw motors for tipper

The EsC will take a hobbywing 1060 with a 20KG servo and a 35T motor, this is how I will assemble it and test it.

[Member FREEDOM83 Trailing And Scaling★★★★]

today work , tomorrow starts body

[Member FREEDOM83 Trailing And Scaling★★★★]

I think I’m going to lack green … but to start I have hehehehehe

printing the first parts:

 

both sides of everything painted, I only lack the body on the outside

And the tipper has already arrived… first set, a bit long?

Then I have removed the front tie-down and the rear wheel arch and it seems that raising it a bit looks better (just what I needed to put everything on top of the chassis spars and be able to remove and put it)

 

Hard work this weekend :

testing tipper

https://www.youtube.com/shorts/0xBbracucuU

 

two details are missing but it’s ready

[Member FREEDOM83 Trailing And Scaling★★★★]

A video of the only test, for now I have to put it up for sale out of necessity:

https://www.youtube.com/watch?v=XNvL6Awk3JU

 

I have made a rear to have both options, in this case for wood

 

Charged !!

[Member FREEDOM83 Trailing And Scaling★★★★]

A couple of photos from Saturday, I did some tests:

And after the tests, the first thing is to try some bigger and softer tires, the second is to move the deposits, for the rest, despite doing tricks on it, it holds up, so it’s time to extremize it a bit to climb, which will be its most common use:

 

I raised the side skids one point, they were completely rubbed below so from there I would not sin anymore

[Member FREEDOM83 Trailing And Scaling★★★★]

Last photos of truck , is SOLD to a friend

 

[Author]

Posts