Hi, I am a newbie from Rocklin. California, USA and I have a passion for researching, creating engineered component parts drawings, then fabricating/machining the component parts and assembling, finishing and programing the model. My initial project took many years to complete but was an exact 1/12th scale RC model of a 1960s vintage P&H lattice boom, crawler mounted crane. I understand that this site is primarily into off-road vehicles, and, while my initial model might be better categorized as construction equipment, it certainly is an off road vehicle! I do feel however that the build details that I explain in the various videos on my @cranemodelbuild3236 YOU TUBE channel could be interesting and informative to subscribers. My most recent project was the transformation of a Kingkong RC model of a Russian CA30 6×6 truck model into a 1964 HD Mack B-81st tractor that all might enjoy by going to the following URL:
https://youtu.be/DMkKRYwfcs0?si=xhEgVYi-9W8eYTVy
Let me know if you have any thoughts or comments on my scale modeling.
Thanks,
Tom (cranemodel1015)
Tom