Scale RC Forum Forum Members’ Builds Off-Road Build Pictures A few of my scale rigs

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #33918
    Moderator
    igbandy
      • Scaling Like A Pro
      • ★★★★★

      Found these 3 photo`s today. Taken about 18 months ago!

      My F350 Hilift and Bowler Buggy.

      Hilift___Bowler_1.jpg

      Hilift___Bowler_2.jpg

      Hilift___Bowler_3.jpg

      More to follow, alot more :whistle:

      #36350
      Moderator
      igbandy
        • Scaling Like A Pro
        • ★★★★★

        My D90

        D90_in_a_hole.jpg

        #36351
        Anonymous
          • Scale Off Road Pro
          • ★★★★★★

          Loving the 90 and i still want your wheels off the f350.

          #36356
          Moderator
          igbandy
            • Scaling Like A Pro
            • ★★★★★

            The wheels in those photo`s are Ansmann 108mm`s.

            A few more photo`s

            normal_Image067~0.jpg

            My Re-Re Pajero, with my ball raced steering, locked diffs, 48 turn motor, 3 Racing winch, Losi 1.9″ wheels and tyres(blue compound) oh and lots of rockrash!

            My Re-Re Tamiya XR-311, fairly standard apart from a 60 turn motor and running a Lipo (as can be seen 😳 )

            normal_Bowler_2_Cropped.jpg

            My Bowler at speed. I love this photo, Bowler is running on a modified Tamiya TB-01 Chassis with Pajero wheels and tyres. Yes I know its independant suspension but it looks fine to me 8)

            normal_Bratfoot.jpg

            My Re-Re Subaru Brat, fitted with a Blackfoot bodyshell. Christened “Bratfoot”. Cant beat a bit of 2wd mayhem!

            #36357
            Moderator
            igbandy
              • Scaling Like A Pro
              • ★★★★★

              A few more of my rigs past and present.

              My First XC when acquired it was painted red and fitted with 2.2″ road tyres. I soon rat`d it, and stuck some Yokomo 1.9″ wheels and tyres to it. This truck was Stripped and out of it I created my XC series 2a Rover and my Bratfoot.

              normal_XC_series_2a.jpg

              My XC Series 2a Rover, . Fitted with ally sliders, invicible body mounts, my ballraced steering, working lights, 3 racing winch and yokomo 1.9″ wheels and tyres. This never got finished, as 1 I sold the chassis and 2 I trashed the shell before painting it!

              normal_Hilift_4.jpg

              Homers F350 Hilift, fairly standard Tamiya Hilift fitted with independant front and rear steering. And an S Collins interior with a Homer J Simpson head fitted. This is my hilft as received several years ago. I put Homer in it.

              normal_12032009361.jpg

              My Hummer, locked rear diff front ball diff everything else is box stock apart from the satin black painted Hilft wheels and tyres. I love this rig.

              A favourite of mine this photo of my Hummer with my XR-311. Not alot to say apart from that I would like a FAV!

              normal_Pajero_7.jpg

              Another photo of my Re-Re Pajero, this was totally stock when photographed.

              #36352
              Moderator
              Tim_
                • Scale Off Road Pro
                • ★★★★★★

                Quite a collection there! B)

                Keep going ;) :P

                #36358
                Moderator
                igbandy
                  • Scaling Like A Pro
                  • ★★★★★

                  jeep_front.jpg
                  jeep_side.jpg
                  Jeep_Rear.jpg

                  #36359
                  Moderator
                  igbandy
                    • Scaling Like A Pro
                    • ★★★★★

                    A couple of pic`s of my Fastrax Cage, specs as follows. SCX10 running gear, overdrive gears in front axle underdrive gears in rear axle, ezrun 10.5 motor powered by a mamba max can be run on 2s or 3s and on 3s it turns into an animal. Have stretched the rear axle back by almost 10mm to help it climb. Tyres are HPI 2.2″ paddles mounted on some chinese 2.2″ alloy`s.

                    Cage_front.jpg
                    Cage_side.jpg

                    #36353
                    Anonymous
                      • Scale Off Road Pro
                      • ★★★★★★

                      thats a nice collection you have there :cheer: :cheer:

                      #36371
                      Moderator
                      igbandy
                        • Scaling Like A Pro
                        • ★★★★★

                        The Pinz is back! Tamiya CR-01, Proline Recon Bodyshell, 35 turn igified motor running on a 3s lipo. Quite capable, needs a bit more work as she hasnt been run for over 12 months after a slight incident involving a river and a harsh under current!

                        Pinzy_2012_01.jpg

                        #36354
                        Anonymous
                          • Scale Off Road Pro
                          • ★★★★★★

                          so its not just me that takes trucks deep sea diving then. funny thing is it was a CR01 as well. 😆 😆

                          #36355
                          Moderator
                          Geoff
                            • Scale Off Road Pro
                            • ★★★★★★

                            the Pinz Proline Recon Bodyshell, looks good :cheer:

                            Geoff in London    

                            RCWTF OFFICIAL REDCAT GEN 7 DRIVER 

                              

                          Viewing 12 posts - 1 through 12 (of 12 total)
                          • You must be logged in to reply to this topic.